jacket

Matthew Aperry Review Round 2, Check Jacket

I was at the shallow end of a monthly paycheck and I wanted an odd jacket for more casual functions, something that wasn’t as businesslike as a regular suit jacket but still smart enough for lazy summer afternoons and social catch-ups.

After placing a recent order for a suit from online tailoring company Matthew Aperry, I had an opportunity to review a follow up product from the online custom clothier to see if the fit could be improved with subsequent orders.

I was interested in a jacket with a more textured and thicker weave than the matte solid blue suit that I had ordered. I noticed a fabric in their books labelled as a “super 160s”. I wouldn’t place too much stock in the super number as the labelling can be quite erroneous but the wool had a nice open weave, a good texture and an interesting pattern which I could not find elsewhere.

PageA1-A7

THE SPECS

I spoke to Belinda about the overall workmanship of their jackets. Their default construction is a half canvas with a floating chest piece. This is essentially a piece of wool/cotton canvas slotted between the outer shell of the fabric and the lining at the upper half of the jacket to give the jacket some shape. I requested the following changes to their default pattern.

  • Padded lapels and full canvas. The extra canvas gives the jacket lapels a “roll” which cannot be replicated with the cheaper fused effect. The canvas also means the jacket won’t bubble over time as there’s no glue between the fabric to degrade.

IMG_20141206_124907_2

  • White resin buttonsIMG_20141206_125051_2
  • Blue patterned liningIMG_20141206_124943_3
  • Ticket pocket
  • 3.5 inch notch lapels

Having gone through the ordering process once, it’s far easier to repeat future orders and make changes from the pattern they have stored in their database. My basic measurements were already on a form and I changed the shoulders to make them a little smaller. I also reduced the chest size by 1cm to remove any lumps in the fabric.

The trimmings again, were a basic polyester lining and resin buttons and it would’ve been nice if they could upgrade to something slightly better like mother of pearl or horn, even for a marginal premium.

Nevertheless, the quality of buttons isn’t a huge issue. I can easily replace them with some 24L /32L mother of pearl buttons I picked up from Ebay rather cheaply.

The stitching was clean, typical of a machine made jacket and the buttons were sewn on firmly. The buttons are machine sewn and a little messy. There was some hand finishing around the armholes, which is something that’s rarely seen on jackets at this price range.

Typically, jackets that cost under $400 are 100% machine made, fused and are made of a polyester blend fabric. This is not one of those jackets and represents a reasonable quality for the price.

THE FIT

The package arrived in about 2 weeks in a padded bag from TNT express. Unfortunately, when I received the jacket, there were some slight issues with the shoulders which were still cut about 1cm too wide on either side. It seems no matter how much I request the shoulders to be made a little tighter, their default pattern shifts the shoulders to a wider measurement. This is something I wish Matthew Aperry could address with future orders.

I dropped the jacket off to the tailor for some minor alterations to the shoulder and while it took a few weeks for the tailor to finish the job, it was returned with an improved fit.

Fit, after some minor tailoring thanks to BQ Yan of Sydney

Fit, after some minor tailoring thanks to BQ Yan of Sydney

I was generally happy with their pattern and I noticed they were able to have the checks match up around the shoulders and the pockets, which many made to measure companies could not deliver for that price.

I noticed the patternmaking at the bottom of the jacket could use some improvement, especially as the checks don’t actually line up but it was far more than what I expected for a sub-$250 jacket. Equivalent offerings at places like MJ Bale or Charles Tyrwhitt don’t offer this level of construction and are priced higher.

The rest of the fit was good. I was quite happy with the drape and texture of the fabric. They were able to resolve some problems with a slightly dropped shoulder and the cut was slim but not overtly tight.

CONCLUSION

As I said before, I think Matthew Aperry offer a reasonable product at a more than reasonable price range and their offerings improve with subsequent purchases. Online made to measure is a process and while the first order might not fit 100%, it’s worth a second try to get things right and at their price point, they are an affordable option that can yield a lot of potential. Their willingness to accommodate requests also makes them a better option if you’re looking for something specific.

Now if only they could trim down the shoulders on their default cut and improve the quality of their buttons and lining fabric, they’d be one of the best value online tailors around at the sub $400 bracket.

Matthew Aperry can be found at http://www.matthewaperry.com

Any requests outside the standard patterns should be made by email. They’re generally quite accommodating when it comes to unusual requests.